Straight Answer

What if your dose is over 100 units?

A U-100 syringe holds 1 mL, so a bigger draw takes two syringes or a stronger vial, and the math tells you which.

A Black woman in her early fifties in a violet sweater, reading glasses pushed up, holds a small vial while tapping a pocket calculator at a white marble kitchen counter beside a notepad and a white pharmacy bag

Why the syringe stops at 100

The syringes sold for peptides and compounded GLP-1s are insulin syringes marked "U-100," which means 100 units fit in 1 mL. One unit is 0.01 mL of liquid. The markings were made for insulin, where a unit is also a dose of the drug, and that's where the confusion starts: for anything else, a unit on the barrel is only a volume, and it tells you nothing about milligrams until you know how strong the liquid is.

The strength is on the vial label as milligrams per mL. The math is the amount you want in milligrams, divided by the mg per mL, times 100. When the answer comes out above 100, the dose takes more than 1 mL, and no U-100 syringe holds that in one pull. If you're moving from a branded pen, this is new territory, since the pen clicked out milligrams for you and the vial hands you the math.

Take 12.5 mg as an example amount. It's one of the dose steps on the tirzepatide prescribing label (2.5 mg up to 15 mg in 2.5 mg steps), and it's here only to show the math, not as an amount to take.

Vial strength 12.5 mg in mL 12.5 mg in units
10 mg per mL 1.25 mL 125 units, two draws
15 mg per mL 0.83 mL 83.3 units, one draw
20 mg per mL 0.625 mL 62.5 units, one draw
30 mg per mL 0.42 mL 41.7 units, one draw

Source: the 12.5 mg step is from the tirzepatide prescribing label. The units are math, 12.5 divided by the strength, times 100. A vial labeled 10 mg per mL is how a set of instructions ends up saying 125 units, and numbers like 83.3 fall between the marks on a syringe, which is one more reason the reconstitution calculator is handy.

Option one, two draws

The same 125 units can go in as two draws that add up to the total, a full 100 units and then 25. A 1 mL syringe is usually marked every 2 units, so an odd number like 25 is easier to hit on a 0.3 or 0.5 mL syringe, which is marked every unit, and the injection supplies guide covers which sizes read most precisely. Each syringe gets used once, so that's two syringes and usually two shots a short distance apart. Write both numbers down before you start, because the second draw is the one that's easy to lose track of.

Option two, a stronger vial

The more milligrams in each mL, the fewer units the same dose takes. How you get there depends on what's in your fridge.

A premixed compounded vial comes from the pharmacy at a fixed strength, and you can't make it stronger at home. Adding water only makes the draw bigger. If two draws every time is a nuisance, the pharmacy or prescriber can tell you whether a more concentrated vial is an option.

A powder vial you mix yourself gets its strength from the water you add. A 30 mg vial mixed with 3 mL is 10 mg per mL, and the same vial mixed with 1.5 mL is 20 mg per mL, which turns that 125-unit draw into 62.5. The reconstitution calculator runs this for any vial size and amount, and the bacteriostatic water math guide walks through the mixing step by step.

What it changes for your dose

Nothing about the milligrams changes, only how you measure them. Before you draw, check that the units on your instructions were worked out from the strength on the vial you're holding, since a new vial at a different strength makes the old unit number wrong. The tirzepatide dosage page has a units table for 1, 2 and 3 mL of water at each step, the semaglutide dosage page does the same for semaglutide, and the tirzepatide and semaglutide pages cover the rest, along with live prices.

Branded tirzepatide and semaglutide have a label and a prescriber behind them, a compounded vial has its pharmacy's label, and a vial bought online is sold for research, so the strength on whichever label you're holding is the number the math starts from.

Questions people ask

Can you take more than 100 units of tirzepatide?

A tirzepatide dose can work out to more than 100 units, it just won't fit in one U-100 syringe, because 100 units is a full 1 mL of liquid. It goes in as two draws, or a more concentrated vial brings the same milligrams under 100 units, and the vial's strength in mg per mL decides which number you're looking at.

How many mg is 100 units of tirzepatide?

100 units is 1 mL, so it holds whatever one mL of your vial holds. That's 10 mg in a vial labeled 10 mg per mL and 5 mg in a vial labeled 5 mg per mL.

Can you take more than 100 units of semaglutide?

The math is the same as for tirzepatide, because the syringe measures liquid. A draw over 100 units means more than 1 mL, which takes two syringes or a more concentrated vial.

Is there a syringe bigger than 100 units?

U-100 insulin syringes top out at 1 mL, which is 100 units. Bigger syringes are marked in mL rather than units, so their lines are coarser and harder to read for small amounts.

Should I add more water to make the draw easier to read?

More water makes each unit weaker and the draw bigger, which is the opposite of what you want when you're over 100. Less water in a powder vial, or a stronger premixed vial, is what shrinks the draw.

Keep reading

Your next step

Tirzepatide price today

$1.20 /mg

Lowest at a High confidence vendor, out of 38 vendors we track.

See every Tirzepatide price →

Semaglutide price today

$2.58 /mg

Lowest at a High confidence vendor, out of 30 vendors we track.

See every Semaglutide price →

Also on Android

Get Peptide Price Lab on Google Play

Research use only. Peptide Price Lab is an editorial calculator. Nothing here is medical advice, a recommendation, or a prescription. Consult a qualified clinician before anything that meets your body.